Sunday, September 13, 2026

Stan Meyer's Steam Resonator — Gerbers, BOM and PCB | Stanley Meyer Open Hardware

Stan Meyer's Steam Resonator

Stan Meyer's Steam Resonator

Steam Resonator & EPG boards sit at the thermal/EM end of the Meyer replica stack: instead of driving a wet-cell or a VIC transformer, they drive a resonant stage tuned around phase-change and particle-generator behavior. This is the family builders reach for when the project moves past plasma/electrolysis-style cells into steam-phase experimentation.

This listing is Version 1 of the Steam Resonator board — the baseline circuit before the Teensy-driven Version 2 rework. Treat it as the reference design: it documents the original discrete resonator topology and driver arrangement that Version 2 will replace with a microcontroller-timed drive signal, so it's worth pulling the Version 1 gerbers even if you plan to build V2, purely to see what the MCU rework is standing in for.

Order the bare board to bench-test the resonator stage on its own before integrating it with a GMS control card or VIC front end. As with the rest of the library, this is published as documentation of the replica circuit — not as a claim about output performance — so budget your own instrumented wall-plug-in vs. output measurement if that's part of your build log.

Order the bare board direct from PCBWay: https://www.pcbway.com/project/shareproject/Stan_Meyer_s_Steam_Resonator.html
Manuals, kits and assembled hardware — Secure Supplies shop: https://www.patreon.com/c/securesupplies/shop
Schematics, build support and the full library: https://www.patreon.com/c/securesupplies

No comments:

Post a Comment